Our engineer and builder Scott Cherry has completed the stands for the new Water Towers. If you would like to add a tower to your plot, follow these steps.
1. Grab a stand and dig a shallow trench for the back legs and level.
2. After leveling, set the front legs so they rest on the wood beams of your plot. Use a drill and star bit (found on bench in shed) to attach the two predrilled screws to the beam.
Add a barrel, attach soaker hose, fill and you are done.
If all this seems too much to do in 106 degree heat…No Worries! We will be installing these during our Garden Workday, September 12.
Thanks again to Scott, Abdel, and for whoever installed a stand and water tower for me!